WPS-500-PTZ-IP Installation Manual
Pg. 35
www.snapav.com Support: 866.838.5052
12.6- PPPoE & DDNS Settings
12.6.1- PPPoE Settings
Point-to-Point Protocol Over Ethernet (PPPoE) is a network protocol primarily used DSL (Digital Subscriber
Line) providers and modems. This protocol requires a login to connect to the modem even when a router is
used. Configuration of these settings is not required to operate the camera on a standard network.
PPPoE
Enable to allow the Camera to use PPPoE for external network access the
Camera.
Username
Login name from the service provider
Password
Password for the above username.
12.6.2- DDNS Settings
DDNS (Dynamic DNS) maps Internet Domain Names to an IP through services like
WirepathDNSWirepathDNS.com. When configured, the Camera is available remotely via a simple easy to
remember name such as JonesIPCamera.Wirepathdns.com
Configuring DDNS is not required for remote access, but avoids having to pay for and remember a static IP
address from the ISP.
See Section
5- Configure Camera for Remote Access
for details on configuring remote access.
DDNS
Enable to allow configuring and using a DDNS service.
Provider
Name of the DDNS service provider.
Hostname
Name to use when accessing the Camera remotely.
Example: JonesIPcamera.
State
Current connection status of the DDNS service.
This field will update automatically shortly after entering and applying a
Hostname.
Summary of Contents for WPS-500-PTZ-IP
Page 2: ......
