GSM PHONE BLOCKER WCUT-T Series
1)
Chose a place that you want to install it.
2)
It is recommended to install on the wall or ceiling where is well ventilated.
3)
Connect antennas on the system.
[note: Two antennas are included; one is with red ring and the other is without it. Connect the
antenna without a ring to low band connector and the red ring antenna to high band connector as
above picture. Also, make sure you connect antennas first before you turn on the switch. If you turn
on the switch before you connect antennas, it will cause fatal damage on the system]
4)
Connect AC Adapter to the system and plug it into the AC socket.
5)
Turn on the switch
6. OUTPUT POWER ADJUST (OPTIONAL)
Wireless Tsukamoto Co., Ltd. 4/5
MTQP720-1
Rev.0
