4 BlackBox and WhiteBox F-1
24
W-DMX G4(S) User Manual, edition 2
2013-10
To change the CTRL mode, proceed as follows:
The unit is in Transmit Mode (TX), working as a transmitter.
2. Release the red function (1) button.
3. Press the red function button (1) repeatedly until the desired mode is
displayed via the status of the following LEDs:
G4 LED
RED SIGNAL LED
G3 2.4 GHz mode
G4 2.4 GHz mode
G4S 2.4 GHz mode
(on transmitter)
G4S 5.8 GHz mode
(on transmitter)
The desired mode is set.
4. Press and hold the red function button (1) for 3 seconds.
The unit exits CTRL mode (configuration) and CTRL LED turns off.
Normal operation restarts.
1. Press and hold the red function button (1) on the front panel for at least
10 seconds.
The CTRL LED (2) blink. TX, RX, DATA and LINK LEDs are rotating.
Hints
•
Do NOT release the red function button (1) until TX, RX, DATA and
LINK start rotating and CTRL is blinking.
•
Keep holding the red function button (1) even if the LINK LED starts
blinking. This allows you to go through the unlink mode without
unlinking.
•
Old G4 software indicate CTRL mode with CTRL and TX on, RX,
DATA and LINK off. Therefore, to exit control mode with Old G4
software, unplug power.
•
Old G4 software is compatible only in G3 and G4 mode.
G3 units are compatible only in G3 mode.
5 BlackBox and WhiteBox R-512
2013-10
W-DMX G4(S) User Manual, edition 2
25
5
BlackBox and WhiteBox R-512
BlackBox and WhiteBox are functionally identical. The BlackBox is intended for
indoor usage, the WhiteBox for outdoor usage.
5.1
Scope of delivery
5.1.1
BlackBox R-512
•
1 x BlackBox R-512 device
•
1 x user manual
•
1 x antenna adapter
•
1 x antenna indoor (2 dBi)
•
2 x mounting bracket
•
1 x Phoenix gold connector
•
1 x power cable without plug (MK I only)
5.1.2
WhiteBox R-512
•
1 x WhiteBox R-512 device
•
1 x user manual
•
1 x outdoor antenna (2 dBi)
•
1 x Phoenix gold connector
5.2
Connectors and ports
5.2.1
BlackBox R-512
Fig. 7: Connectors and ports of BlackBox R-512
2014-03
W-DMX G4(S) User Manual, edition 3
2014-03
W-DMX G4(S) User Manual, edition 3