FCC ID: OIA-BR1200
6
Typical installation will include two BR1200’s, each with an installed antenna
assembly, located in a direct line-of-sight up to 10 miles apart. Each finished
radio/antenna combination can then be mounted to a suitable mast that has
already been installed on an outdoor structure. Structures include buildings,
towers, chimneys, etc.
Initial preparation will be to determine the proper location of each BR1200.
Wherever possible, installer will visually site each location. Radios will be
aimed at each other using the built in adjustments provided with the mounting
bracket.
Electrical connections are provided and clearly marked. The connector
marked “LAN” will supply standard IEEE 802.3 10BASE-T data (compliant
with IEEE 802.11) as well as the radio operating voltage of 24V (AC or DC).
Connect a suitable Category 5 cable with the connector provided and dress it
appropriately to an interior location where it can connect to a the LAN and
prime power. An alternate “Power Only” connection is provided in the event
that 24 V is available closer to the BR1200 installation.
