5
2. Install the [eMailToPager] software CD execution file into your P/C or N/B
3. Click
[eMailToPager]
icon to run the application software.
Example Programming Screen as below
a.
Capcode :
This is for 7 digits POCSAG address. And it must be same as the used receiving pager.
b.
Date rate :
This should also be set on the same speed rate with the used pagers.
And the baud rate is in POCSAG 512bps or 1200bps or 2400bps type only.
c.
Check Time :
Check times per minute for your e-mail messages incoming.
d.
Send Time :
Message forwarding to the receiving pager per set minutes.
e.
Send count :
Counting for message forwarding times.
f.
Length :
Each forwarding alphabet length (maximum in 40 characters).
g.
Time:
With or without the forwarding e-mail message containing the actual receiving time.
h.
sender:
With or without the forwarding e-mail message containing the sender name.
i.
Subject:
With or without the forwarding e-mail message containing the subject contents.
j.
Content:
With or without the forwarding e-mail message containing the e-mail contents.
k.
TEST:
The EM-898 can be operated as a simple on-site office paging transmitter. Simply types in
your desired message in this block and click the
[SEND]
icon to start the transmission to pager.
