5418 Elmwood Avenue, Indianapolis, IN 46203-6025
06-1064-060611
All rights reserved.
Jackson Systems, LLC 2010
Intellectual rights apply.
©
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference and (2) this device must
accept any interference received, including interference that may cause undesired operation.
If the battery voltage drops to where it could interfere with reliable operation, the thermostat LCD
will alternately display
in place of the room temperature. Replace batteries immediately. It will
be necessary to reset the time of day and the day of the week after changing the batteries but
the schedule will not be affected as it is saved in non-volitile memory.
Even if communications is lost with every thermostat in your Wireless Comfort
Your Wireless Comfort
Lo
Inside Temperature
Calibration
™ zoning system,
the zone control panel will still be able to operate the HVAC system to maintain a preset heating
and cooling temperature as selected by your installing contractor to prevent freezing or
overheating of all zones.
™ thermostats have been accurately calibrated at the factory. However, if
the inside temperature displayed on the LCD requires re-calibrating, press the
key 4
times until only the inside temperature is displayed on the LCD. Use the Up and Down keys to
change the inside temperature in 1 degree increments.
MENU
Caution: Re-calibrating the inside
temperature display requires the use of a highly accurate digital thermometer. Therefore,
it is recommended that you contact your heating and air conditioning contractor in the
event re-calibration is required.
Low Battery
Indication
Inside
Day
Th
AM
Heat
AUTO
Set To
MENU
HOLD
NEXT
ENTER
Schedule
Inside
MENU
HOLD
NEXT
ENTER
8
