Wiratech FRM-1120L, Manual, Page: 14 / 31

13
Model
Outer dia.
（
mm
）
Height
（
mm
）
Low temperature series
120-150
℃
（
NO:935
）
Φ 36 16
Φ 36 32
Φ 36 40
Moderate temperature series
135-165
℃
（
NO:932
）
Φ 36 16
Φ 36 32
Φ 36 40
High temperature series
150-175
℃
（
NO:930
）
Φ 36 16
Φ 36 32
Φ 36 40
13), Adjustment of coding position:
Considering length of bag opening, the user can locate the coding position by adjusting
coding position switch.
14), Adjustment of line number for printing label:
Arrange types within range stipulated in
IV Performance Features
in this manual, then
use the provided silicone bar to fix the types in required axial position.
3. Starting procedure
(1), Connect the power supply and startup switch, indicating light will light, then adjust the
speed-adjusting knob and all transmission parts will start to run synchronously.
(2), Micro-adjust the knob of embossing wheel to make that wheel swivel, after getting a
proper pressure, fix limiting screw.
(3), Once turn the heating switch on, the green light of the electronic temperature controller
will light. According to the material and thickness of the packing bag, adjust the
temperature controller to the temperature required, then set the position of heating knob
of ink roller. Once the heating blocks and ink roller heating block begin to preheat, the
machine needs to be started meanwhile and kept running at low speed.
(4), That whether it is necessary to turn on the fan for cooling depends on the material and
thickness of packing bag.
(5), Flatten and align sealing opening, then deliver the bag by aligning the bag opening with
the feed opening, when the bag opening is gripped by the sealing belts, which makes the
bag move forward automatically, at that moment, please do not push it in or pull it out by
force, otherwise irregular sealing or breakdown will happen.
(6), If it is found that there is dirt attached to the sealing belt or the heating block, you need
to stop the sealer and clear it.
4. Stop operation
In order to prolong the using life-span of the sealer, please remember, before shutting down