1.
Use only cold water to fill the kettle.
2.
The water level must be between the MAX. and MIN.
marks.
3.
Switch the kettle off before removing from its base.
4.
Always ensure that the lid is tightly closed.
5.
The base and exterior of the kettle must not become wet.
6.
If the kettle is overfilled, boiling water may be ejected.
7.
Save these instructions for future reference.
1.
Initial Use
: It is recommended that you discard the
water boiled in the kettle for the first couple of times to
remove any dust and material that is left behind from the
manufacturing process.
2.
How to Operate
:
a)
Open the lid by pressing “Trigger to Open” switch and
fill with water to the levels indicated. Replace the lid.
Caution: Water must be filled between the MAX and
MIN level as indicated on the kettle. Too little water will
damage the heating element and too much water will
cause boiling water to escape during the boiling
process.
b)
Place the kettle on the Power base and connect to your
electrical supply. Position the kettle so that the spout of
the kettle is faced away from you.
c)
Press down the On/Off switch and the indicator lamp
will light up to indicate the water is being boiled.
d)
Never remove the lid while water is boiling.
e)
Once water has been boiled, the kettle and the
indicator lamp will automatically switch off.
f)
The boiling process can be terminated at any time by
lifting the kettle off the power base.
HOW TO OPERATE
PRECAUTIONS