Wintriss SmartPAC PRO, User Manual

Page: 118 / 318

1143100 SmartPAC PRO User Manual
118 Chapter 3 – SmartPAC PRO Initialization Mode
System Init
(INITIALIZATION
– SYSTEM INIT)
Figure 3-27. Initialize SmartPAC System Screen
Follow the instructions in the sections below for
•
Reset Initialization Data, next section, to clear initialization data from SmartPAC PRO and
modules.
•
Application Data Menu , page 120, to delete tools, dashboards, favorites and/or screen captures
•
Disable Loss Rotation , page 122
Reset Initialization Data. . .
(INITIALIZATION
– SYSTEM INIT – RESET INITIALIZATION DATA – Select Modules to Initialize [to
clear data])
To clear initialization data from SmartPAC PRO, follow these steps.
1. In the Initialization screen, press SYSTEM INIT. The Initialize SmartPAC System screen
appears, Figure 3-27.
2. Press RESET INITIALIZATION DATA…; the Modules Available to Initialize window opens.
3. In this window are buttons for modules you may want to clear initialization data from. Buttons
are labeled “[Module Name] excluded.”