Wintriss SmartPAC PRO Servo, User Manual, Page: 99 / 228

SmartPAC PRO Servo User Manual 1147100
Chapter 4
– Initialization Mode
99
SETUP NETWORK
(INITIALIZATION
– SETUP NETWORK)
NOTICE
•
Your network administrator must connect SmartPAC PRO Servo to your network before you
can use e-mail messaging or SmartView remote viewing utility. For e-mail, your network must
have a valid SMTP mail server.
•
If your network requires static IP addresses, your network administrator should call Wintriss
Tech. Support.
The SETUP NETWORK item on the Main Initialization Menu allows you to set up SmartPAC PRO
Servo’s E-mail and SmartView functions and to make other settings necessary to configure a
SmartPAC PRO Servo network. You make these settings on the Network Setup Utility screen, Figure
4-25.
Figure 4-25. Network Setup Utility Screen
E-MAIL FUNCTION
(INITIALIZATION
– SETUP NETWORK – E-MAIL FUNCTION)
NOTICE
Consult with your network administrator when setting up e-mail.
SmartPAC PRO Servo’s E-mail function allows you to send e-mails to individuals in your SmartPAC
PRO Servo network and to other recipients, such as Wintriss Tech. Support, via the Internet. If you
plan to use E-mail, do the following to enable this function:
1. Select SETUP NETWORK on the Main Initialization Menu to display the Network Setup Utility
screen.