Wintriss SmartPAC PRO Servo, User Manual

Page: 102 / 228

1147100 SmartPAC PRO Servo User Manual
102 Chapter 4
– Initialization Mode
COMMUNICATIONS
(INITIALIZATION
– DIAGNOSTICS – COMMUNICATIONS)
When you select the COMMUNICATIONS item on the Diagnostics Menu, the Communications
Data Viewer screen, Figure 4-27, displays.
Figure 4-27. Communications Data Viewer Screen
This screen allows you to verify communications between SmartPAC PRO Servo and its installed
modules, including SFI’
In the “combined” view, Transmit and Receive data are shown together, Transmit data being
displayed as blue on a white background, Receive data displayed as white on blue. This view shows
the data as it is transmitted and received in real time. Press the
Reset Buffer button to view the data
starting at the beginning of the buffer.
In the “split” view, Transmit data is shown in the upper half of the screen, Receive data in the lower
half. In this view, the data is always shown starting at the beginning of the buffer.
Normal communications between SmartPAC PRO Servo and the selected module (e.g., SFI) is
indicated by both Transmit and Receive data being displayed on the screen. If no data or only partial
data is displayed, SmartPAC PRO Servo and the other module are not communicating properly.
If the Transmit and Receive Data screen indicates a communications problem, you can perform a
“loopback test.” Contact Wintriss Technical Support for more information.
SET CLOCK
(INITIALIZATION
– DIAGNOSTICS – SET CLOCK)
When you select the SET CLOCK item on the Diagnostics Menu, the Set the Clock screen displays, .