Wintriss SmartPAC 2, User Manual, Page: 525 / 604

SmartPAC 2 with WPC 2000 Integration User Manual 1128600
Reporting Downtime and Scrap to LETS I-21
When you press ENTER, the Scrap Value Entry window disappears, and the value you
keyed in is displayed beneath the “Scrap Value” caption to the left of the
F3 function key,
as shown in Figure I-15, where a scrap value of “30” is used as an example. The Good
Parts counter is reduced by the amount of your scrap entry (e.g., 900-30=870 in
Figure I-15).
4.
If you have made previous Scrap Value entries for this job, key in the sum of the scrap
count you wish to document this time and the current total shown in the Scrap Value field,
and press ENTER. See Figure I-16, page I-22, in which “40” is used as the sample scrap
input.
Figure I-15. Counters Screen with Scrap Value Updated to 30 Items
INDIVIDUAL SCRAP ENTRIES MUST INCLUDE CURRENT SCRAP TOTAL
The Scrap Value counter maintains a cumulative total of the scrap items documented for
each job. In order to increment this counter, the value you enter in the Scrap Value Entry
window (see Figure I-14, page I-20) must include the current scrap total–in other words,
you must add the number of scrap items you wish to document to the current value shown
in the Scrap Value counter. The Good Parts counter, on the other hand, is reduced by the
actual number of scrap pieces you are reporting in this session, in other words, the
difference between your scrap entry and the current Scrap Value total.
For example, if the count in the Scrap Value field is “30,” and you want to include an
additional 10 parts in the count, you would enter “40” (not “10”) in the Scrap Value Entry
window. When you are returned to the Counters screen, the Scrap Value counter would
display 40 parts; the Good Parts counter would be reduced by 10 parts.
F1
F2
F3
F4
F5
F6
F7
F8
NOTICE