Wintriss SmartPAC 2, User Manual

Page: 213 / 604

SmartPAC 2 with WPC 2000 Integration User Manual 1128600
Initialization Mode 4-27
To access a name beneath the MORE NAMES indicator, move the highlight bar down past
the last item in the list. Additional Custom Name entries display sequentially, one at a
time.
5.
Repeat steps 2 through 4 for the other user inputs.
6.
When you are finished, press RESET twice to return to the Main Initialization Menu.
Press Parameters
(INITIALIZATION – PRESS CONTROL – PRESS PARAMETERS)
The Press Parameters item on the WPC Initialization Menu gives you access to the Press
Control Parameter Menu (see Figure 4-21), on which you can make the following WPC 2000
settings:
•
Top-stop Angle
•
Auto Carry-up Angle
•
Micro-inch Time and Angle
•
Main Air Pressure Limit and Counterbalance Air Pressure Offset
•
Stop-time Limit
•
Start-time Limit
•
Shutdown Time
•
Flywheel Timer
•
ACTS Angle
You can also select the units that are used to display pressure on this and other Press Control
screens and instruct WPC 2000 to perform an Initialize Parameters operation.
To set any of the bulleted items shown above, perform the following steps:
1.
On the Press Control Parameter Menu, move the highlight bar to the item you want, using
the cursor keys, and press ENTER.
Figure 4-21. Press Control Parameter Menu