Wintriss AutoSet PAC 120 VAC, User Manual

Page: 67 / 156

AutoSetPAC User Manual 1101600
Chapter 3 Initialization and Calibration 67
Figure 3-6. Load Monitor Input Name Menu with “INPUT 1” Highlighted
2. To change an input name, select that entry. An Alphabetic Entry window displays, as shown in
Figure 3-7.
Figure 3-7. Load Monitor Input Name Menu with Alphabetic Entry Window Displayed
3. Follow the directions in the window to key in the name you want. The name can be any
combination of alphabetic characters, numbers, and symbols.
• To key in letters, use the Up (

), Down (

), Left (

), and/or Right (

) cursor keys to
highlight each letter, then press ENTER to select it.
• To key in numbers, press the desired selection on the numeric keypad, and press ENTER.
•
To clear an entry, press the CLEAR key.
•
To accept your selection, press the F6 function key.
To cancel your selection, press RESET.
4. Press RESET to return to the Tonnage/Waveform Initialization Menu.