Winton WTL Series, Owner'S Manual, Page: 9 / 20

V1
7
Winton WTL15
4. HYDRAULICS & SAFETY
Safety: Ensure tractor and machine is stopped & keys out of ignition before set-up/maintenance.
Fitting Hydraulics
Ensure your tractor has sufficient hydraulic oil in the reservoir before attaching hydraulics pipes.
Consult your tractor manual for more information on the hydraulic tank and checking oil levels. Your
manual will also advise on the grade of hydraulic oil to use. Type 32 hydraulic oil is a well known grade
for compact tractors.
There is one hydraulic fitting (1) which needs to be coupled, this is 1/2 Inch BSP (male) which is
common for most compact tractors. Converters are also widely available if your tractor does not suit
this size.
First, pull the collar back on the tractor female hydraulic fitting. Then push the male trailer fitting in to
the socket and release the collar to secure in to place.
Hydraulic Safety
Always make sure the hydraulic system and all components are kept in good condition and clean.
Before applying any hydraulic pressure to the system, make sure all components are tight and that
lines, hoses and couplings are not damaged. Replace any worn, cut, flattened or crimped hoses and
lines straight away.
Do not attempt any makeshift repairs to the hydraulic lines, fittings or hoses by using tapes or clamps.
The hydraulic system operates under high pressure. Such repair may cause hazardous and unsafe
conditions.
Always wear proper hand and eye protection when working with high pressure hydraulics. Use a piece
of wood or cardboard as a backstop instead of hands to isolate and identify any leaks.
If injured by a concentrated high pressure stream of hydraulic fluid, seek medical attention
immediately. Serious infection or toxic reaction can develop from hydraulic fluid on the skin.
1