P A G E
|
4
Wintex Agro, Vilhelmsborgvej 8C, DK-7700 Thisted
+45 97990800, [email protected], www.wintexagro.com
The depth is infinitely variable, but pre-set from the factory at at 30 cm and 60 cm. The outer ruler shows the
full depth of the point where the sample will be collected. The inner ruler shows where the sample will be divided.
4.
INTERRUPTING THE PROCESS
Due to various reasons it might be necessary to interrupt the process. In this case just deactivate the
foot switch, and the process will stop immediately. When reactivating the foot switch and the brake
handle at the same time, the probe will go back into start position. The soil will be discarded and not
filled into the soil boxes.
If the soil sampler is delivered with a remote control, the process will be interrupted by activating the
stop switch of the remote control instead.
5.
REPLACEMENT OF O-RING, SCRAPER AND PROBE
Revolving platform
O-ring
Scraper
REPLACEMENT OF PROBE
Remove the soil box, and unscrew the six bolts with a 5 mm hex key. Both halves of the retainer
can now be removed.
Unscrew the three bolts. The revolving platform can now be pulled down along the probe.
Caution: The probe has sharp edges!
