Winterhalter PAY PER WASH PT V01 Series, Supplementary Instructions To The Operating Instructions

Page: 8 / 10

PAY PER WASH functions on the warewasher
8
3.3 Malfunctions
The following pictograms apply only to malfunctions to the PAY PER WASH function.
INFO All other pictograms are described in the general operating instructions:
•
Operating instructions UC Series (V02)
•
Operating instructions PT Series (V02)
•
Operating instructions UC Series (V01)
•
Operating instructions PT Series (V01)
UC Series V02, PT Series V02
Pictogram Meaning Possible cause Remedy
Low credit
Only a few wash cycles are still
available.
Enter new wash codes (

3.1.2).
The machine no
longer washes There are no more wash cycles left.
INFO The start button lights up red.
Enter new wash codes (

3.1.2).
Display and con-
trol unit are not
compatible
Display was exchanged Contact a service technician
UC Series V01, PT Series V01
Pictogram Meaning Possible cause Remedy
Low credit
Only a few wash cycles are still
available.
Enter new wash codes (

3.2.2).
The machine no
longer washes There are no more wash cycles left.
INFO The start button lights up red.
Enter new wash codes (

3.2.2).
If the wash code is not accepted, the following display will appear:
Possible cause Remedy
Typing error while entering the code Enter the code again.
Incorrect code sequence Observe the code index.
The touch screen has been replaced but the wash
codes that are generated in the portal are for the
old touch screen.
Request that Winterhalter Sales or the service partner
responsible registers the new touch screen in the portal.
89013899-03; 2021-05; Changes reserved
= code index
Enter wash code