background image

89008157  

17 

10.2  Malfunctions calling for the Winterhalter customer service 

 

 
 

red flashing light:

 the temperature in the boiler or the tank is higher than 95° C.  

 
 
 

 
 

Warning, hot surface!

 Switch off machine immediately. The fault symbol will appear (3) 

and the fault code Err 2 or Err 3. Switch off the main switch. 
Notify the Winterhalter customer service immediately. 
 

 
 
If internal faults should combine to make the machine dysfunctional so that it may no longer be run, the ma-
chine will switch off automatically and display a fault code. 
 

Display  

Possible cause 

Remedy 

Machine switches 
off and displays 

Err 

  1 

Fault inside machine 

Notify Winterhalter customer service 

Machine switches 
off and displays 

Err 

  6 

Fault inside machine or  
water drain is clogged 

Notify Winterhalter customer service or remove 
cause of clogging. 

Machine switches 
off and displays 

Err 

19 

Magnetic valve not closing 

Close the water shut-off valve and notify  
Winterhalter customer service.  
 

Machine is 
switched off and 
displays 

Err 

21 

Magnetic valve not closing 

Close the water shut-off valve and notify  
Winterhalter customer service.  
 

Machine switches 
off and displays 
nothing at all 

Fault inside machine 

Notify Winterhalter customer service 

11 Emissions 

Noise 

The workplace-related emissions LpAeq

 

as defined in DIN EN ISO 11202 amount to <60dB(A) 

Water vapor 

Water vapor escapes from the machine while it is running or when the door is opened. Any wooden furniture 
nearby must be shielded to keep it from swelling. 
 

Summary of Contents for GS 310


















Reviews: