89007311
11
Do not mix different detergent products, since this could cause the dosing pump to
break down due to crystallisation (see Maintenance and care).
If DOS is displayed on the machine operating panel, check the level of detergent and
rinse aid.
Optional extra:
an acoustic signal indicates that you have to top up the machine with
detergent or rinse aid.
To do this fold the lower panelling forwards.
The storage tanks are identified with “detergent” and “rinse aid”.
When filling, make sure that no detergent goes into the rinse aid container and
vice versa.
Then fold back the lower panelling.
The programme button (6) is lit
green
: The tank and boiler have reached their target
temperatures.
The machine is now ready for operation.
Adding regenerating salt *:
* Only for machines with an integral water softener
The salt container inside the machine must be filled with regenerating salt when the
symbol lights up on the operating panel
1
.
You can do this while the machine is on: you do not have to switch off the machine or
drain the water.
Open the screw cap on the salt container, insert the funnel into the filler opening and
add three bags of Winterhalter special salt (= 1.5 kg).
Remove the funnel and remove any salt residues from around the filler opening.
Replace the screw cap, making sure that the lid is not tilted.
Then perform a washing program immediately to flush out any salt residues. Otherwise
there is a risk of
rust forming
in the filling area.
Only add regenerating salt to the salt tank!
The salt used should be very fine (max. grain size 5 – 7 mm). Salt tablets are not
suitable.
Do not add any other chemicals, such as detergent or rinse aid. These will cause
damage to the machine.
1
Note:
If the machine does not have an integral water softener and this symbol lights up, the connected external
water treatment system is exhausted and must be regenerated. Follow the instructions in the documentation
supplied with the water treatment system.
Summary of Contents for GS 202
Page 2: ......
