Wintec MINI46, User Manual, Page: 11 / 13

17 18
16�
CALL TONE:
Factory setting is Music 1
While turn on call tone, temporarily press backlight button to
transmission all member of group�
There are 9 tones are selected�
LCD screen shows as below:
Turn On and select Music 1
17�
SEND ID:
PTT ID (Factory setting is OFF)
Turn on PTT ID, while release PTT, it will transmit PTT ID to all
radio automatically� It provides talker’s ID and ID settings need to
execute by software�
LCD screen shows 【 ID 】 as below:
While receiving others ID, LCD screen shows as below:
12�
TOT:
Time-out timer (Factory setting is OFF)
Choose 30/60/120/180 depending on your need� Turn off “TOT”,
the radio will be continuous transmission� While turn on “TOT” and
choose 30 sec�, push and hold PTT if continuous talk exceeds 20
sec� and radio will send out a beep sound�
At the same time, LCD screen shows “ ” flash, the radio will stop
transmission at time-out�
LCD screen shows
【
TOT
】
words as below:
13�
KEY BEEP:
Factory setting is ON
Turn on /off key beep button, LCD screen shows as below:
14�
PTT BEEP:
PTT melody (Factory setting is OFF)
Turn on PTT Beep, while press PTT button a short beep will be
sent out�
15�
ROGERTONE:
Roger Tone (Factory setting is OFF)
Roger Tone is selectable to ON/OFF
Beep tone will be heard at the end of the each transmission
Contents Guide Contents Guide