5
Operation Guide
Before operating the radio, make sure the attached battery is fully
charged. When the battery level is very low, you need to recharge it
before you can continue to use your radio (The radio has a battery
voltage icon to show the battery status on LCD screen).
Press and hold the power button around 1sec to power on the radio.
Press and hold the power button around 1sec to turn radio off.
Power On / Off
Note: When turned off successfully, the monitor will shut down and
you'll hear the turn-off sound.
．
．
Before press and hold the PTT button, please check if the LED
indicator turns on green or not (Green stands for channel busy).
Press PTT button and speak clearly with your mouth about 5cm away
from the microphone. The LED indicator turns on red during
transmission.
Release PTT button when you finish speaking and receive signals.
During receiving, LED indicator turns on green.
Receiving / Transmitting
．
．
．
Press repeatedly on Up button to adjust the volume louder; Press
repeatedly on Down button to decrease the volume.
Press and hold UP or Down button can quick adjust the volume louder
or lower.
There is a total of 16 levels display, and each adjustment increase or
decrease by 2 levels.
Adjust the volume slowly to avoid outburst of sound harmful to ears.
Adjusting Volume
．
．
．
．
Press CH button. While channel icon blinks, the radio is in the channel
selection mode.
Press [
▲
] [
▼
] to select the assigned channel.
Channel Adjustment
．
．
Summary of Contents for LP-101
Page 1: ...USER MANUAL...
