1.2 Manual Search
You can set parameters in
Manual Search
window if you are familiar with station
frequencies. In this mode, channels can be tuned in by hand.
Channel No.:
Press
to select the channel number you wish to edit
Frequency:
This value will vary according to channel, however, to adjust, use the
number keys to enter in a different frequency.
Bandwidth:
Press
to choose 6M, 7M or 8M. (7M is standard)
At the bottom of this window, there are two dynamic colour bars reflecting the
signal’s quality and strength.
Press
OK
key to start searching. Upon a successful search, the unit will store
the newly found station as a program. During this process, you can press
EXIT
to finish.
Note: this function is for advanced users.
1.3 Channel Edit
Select
Channel Edit
item in the
Installation
menu and press
OK
. The
Channel
Edit
window will be displayed. From here, new channels can be added and the
existing ones can be edited or deleted.
You can use the color keys on the REMOTE to execute the corresponding
commands displayed at the bottom of the screen:
Add (Red key)
Delete (Green key)
Modify (Yellow key)
Add
The
Add Channel
window allows you to enter necessary parameters for a new
channel.
Frequency:
You can input values referring to above.
Bandwidth:
Press
keys to choice 6M, 7M or 8M.
Transmission Mode:
You have a choice of 2K, 8K and Auto. Press
to
select appropriate mode.
Guard Interval:
Available options are: 1/4, 1/8, 1/16, 1/32 and Auto. Press
13
Summary of Contents for STB1HD
Page 1: ......
Page 7: ...6 Remote Control Unit 6...
