Receiver
HDMI OUTPUT: Connect a HDMI display with a HDMI M-M cable here.
Equalizer: Adjust the equalization strength to the received TMDS signals. 0 is the
highest (default) while 7 is the lowest.
TMDS: Plug in a CAT-5e cable that needs to be linked to the TMDS connector of the
Transmitter.
DDC: Plug in a CAT-5e cable that needs to be linked to the DDC (HDCP) connector
of the Transmitter.
5VDC: Connect to 5V DC power supply.
Installation
1. Connect your HDMI source (such as a DVD Player, PS3) to the transmitter.
2. Connect your HDMI display (such as a LCD TV) to the receiver.
3. Connect your CAT-5e cables between the transmitter and receiver.
4. Make sure your CAT-5e cables are tightly connected and not loose.
5. Plug in 5V DC power cord to the power jack of the receiver.
6. If a flickering or a blinking image is seen, adjust the rotational switch to improve the
cable skew.
Notice
1. To reduce the interference among the unshielded twisted pairs of wires in CAT-5e
cable, you can use shielded CAT-5e cables to minimize EMI problems.
2. Because the quality of the CAT-5e cables has the major effects in how long
transmission distance will be made and how good is the received display,
the actual transmission length is subject to your CAT-5e cables.
