WinSystems SAT-520PLUS Operation Manual Download Page 47

WARRANTY REPAIR INFORMATION

WARRANTY 

WinSystems  warrants  to  Customer  that  for  a  period  of  two  (2)  years  from  the  date  of 
shipment  any  Products  and  Software  purchased  or  licensed  hereunder  which  have  been 
developed  or  manufactured  by  WinSystems  shall  be  free  of  any  material  defects  and  shall 
perform  substantially  in  accordance  with  WinSystems’  specifications  therefor.    With  respect 
to any Products or Software purchased or licensed hereunder which have been developed or 
manufactured by others, WinSystems shall transfer and assign to Customer any warranty of 
such  manufacturer  or  developer  held  by  WinSystems,  provided  that  the  warranty,  if  any, 
may be assigned.  Nothwithstanding anything herein to the contrary, this warranty granted 
by WinSystems to the Customer shall be for the sole benefit of the Customer, and may not 
be assigned, transferred or conveyed to any third party.  The sole obligation of WinSystems 
for  any  breach  of  warranty  contained  herein  shall  be,  at  its  option,  either  (i)  to  repair  or 
replace at its expense any materially defective Products or Software, or (ii) to take back such 
Products and Software and refund the Customer the purchase price and any license fees paid 
for the same.  Customer shall pay all freight, duty, broker’s fees, insurance charges for the 
return  of  any  Products  or  Software  to  WinSystems  under  this  warranty.    WinSystems  shall 
pay  freight  and  insurance  charges  for  any  repaired  or  replaced  Products  or  Software 
thereafter  delivered  to  Customer  within  the  United  States.    All fees  and  costs  for  shipment 
outside  of  the  United  States  shall  be  paid  by  Customer.    The  foregoing  warranty  shall  not 
apply  to  any  Products  of  Software  which  have  been  subject  to  abuse,  misuse,  vandalism, 
accidents, alteration, neglect, unauthorized repair or improper installations.  

THERE ARE NO WARRANTIES BY WINSYSTEMS EXCEPT AS STATED HEREIN, THERE 
ARE NO OTHER WARRANTIES EXPRESS OR IMPLIED INCUDING, BUT NOT LIMITED 
TO,  THE  IMPLIED  WARRANTIES  OF  MERCHANTABILITY  AND  FITNESS  FOR  A 
PARTICULAR  PURPOSE,  IN  NO  EVENT  SHALL  WINSYSTEMS  BE  LIABLE  FOR 
CONSEQUENTIAL,  INCIDENTIAL  OR  SPECIAL  DAMAGES  INCLUDING,  BUT  NOT 
LIMITED  TO,  DAMAGES  FOR  LOSS  OF  DATA,  PROFITS  OR  GOODWILL.  
WINSYSTEMS’  MAXIMUM  LIABILITY  FOR  ANY  BREACH  OF  THIS  AGREEMENT  OR 
OTHER CLAIM RELATED TO ANY PRODUCTS, SOFTWARE, OR THE SUBJECT MATTER 
HEREOF,  SHALL  NOT  EXCEED  THE  PURCHASE  PRICE  OR  LICENSE  FEE  PAID  BY 
CUSTOMER  TO  WINSYSTEMS  FOR  THE  PRODUCTS  OR  SOFTWARE  OR  PORTION 
THEREOF TO WHICH SUCH BREACH OR CLAIM PERTAINS. 

WARRANTY SERVICE

1. 

To obtain service under this warranty, obtain a return authorization number.  

In  the  United  States,  contact  the  WinSystems’  Service  Center  for  a  return 
authorization number.  Outside the United States, contact your local sales agent for 
a return authorization number. 

2. 

You must send the product postage prepaid and insured.  You must enclose 

the  products  in  an  anti-static  bag  to  protect  from  damage  by  static  electricity.  
WinSystems is not responsible for damage to the product due to static electricity. 

Summary of Contents for SAT-520PLUS



















































Reviews: