Operating manual
17
8111.01 REV_DA_16052019
2.15.
Setup Menu
Within this menu you can change various settings on the device. For this please place the microswitch no. 8 in
position "On". The above table shows the factory-defined parameters set by initialization.
In this menu you can move with the button Player Change, 301, Double In and Team as in the test menu. The
Team button is used to open and close the desired submenu and to confirm the selection of the new value. Button
301 is used to move forward and to increase the value, while the Double In button is used to move backward and
to decrease the value in the menu and submenu. In the lottery option, the player change button is used to move in
the submenu, as the values are changed using the 301 and Double In buttons.
a) Credits per Game
If microswitch No.8 is set to "On", "
Set Pri
" appears on the upper display. Press the Team button to open the
submenu. In the submenu, you can move (or change the games) with the Players button, while using the 301 and
Double In buttons, you can change the game prices. After setting the values, confirm the new selection with the
Team key and close the submenu. The table shows the game variants and the required credits, which are set ex
works.
GAME / OPTION
CREDITS
180
1/2
301
1
501
2
701
3
901
3
CRICKET
2
DOUBLE IN
0
DOUBLE OUT
0
DOUBLE IN OUT
0
MASTER OUT
0
b) Number of rounds
Press button 301 to move forward in the main menu. If "SET RND" appears on the display, press the Team key
and the submenu will open. In the submenu, you can move (or change the games) with the Players button, while
the 301 and Double In buttons change the number of rounds of the games. After setting the value, confirm the
new selection with the Team button and close the submenu.
c) Time-Limit
Press button 301 to move forward in the main menu. If "
SET Tim
" appears on the display, press the Team button
and the submenu will open. Within this sub-selection, you can change and set the maximum amount of time a
player has to throw an arrow at the dartboard. With 301 and Double In you change the time from 00 to 60 seconds
(10 steps). If you choose 0, all arrows have an unlimited time frame. After defining a time limit, you must press the
Team key to confirm and save the value.
