5
Unit power supply (mains AC
120
V/
6
0Hz)
1.
Check if the power voltage, as shown on the type plate located on the bottom of the set,
corresponds to your local AC power supply.
2.
Connect the power cord to the AC MAINS inlet and the wall outlet. The power supply is
now connected and ready for use.
3.
To switch off completely, unplug the power cord from the wall outlet.
Basic Function
Switching power STANDBY to save energy
1.
Press and Hold the STANDBY FUNCTION button to turn off the Unit.
2.
The display will show nothing and it indicates that the Device is off.
3.
Whether you are using mains or battery supply, to avoid unnecessary energy consumption
always adjust the source selector to STANDBY.
General operation
1.
To select your sound source adjust the source STANDBY/AUX/RADIO/CD MP3/BLUETOOTH
2.
Adjust the sound with the VOLUME -, Button
3.
To switch off the set, adjust the source selector to STANDBY position.
RADIO OPERATION
Radio reception
1.
Slide the STANDBY/AUX/RADIO/CD MP3 selector to AM or FM
2.
Use the FAST FORWARD BUTTON and the REWIND BUTTON to adjust the radio frequency–
3.
Use the Vo
NOTE: If FM is selected, Display will show FM on screen. This goes the same with AM.
4.
When you have finished listening, slide the STANDBY/AUX/RADIO/CD MP3 selector to the
STANDBY position to turn off the unit.
For better reception
-
For FM, pull out the soft antenna. Let the Atenna reach a further open area for better
reception.
Radio Preset
The tracks on the disc can be programmed to play in any order (up to 20) tracks can be
programmed).
1.
Press the F.FWD or REW buttons to select the frequency to be preset.
2.
Press the PROG button while in stop mode. Program number ‘P01” will flash and shown in
the display.
3.
Press the PROG button again, The current radio frequency is now stored into memory, and
the program number changes to “P02”, waiting for your next selection.
4.
Repeat steps 1 to 3 to program additional tracks.
5.
After programming is finished, press the MEMORY DOWN or MEMORY UP button to
navigate between preset stations.
