Antenna Systems
Winsig 3.1 Ultra/Ultra+ operation manual
Operation cont.
3.
Activate the power supply
by pressing the black button on the wall plate. The antenna has a built in electronic signal
booster and will not supply signals to the television unless this is active.
Note: The light next to the on/off button
should illuminate when the electronic booster is receiving power. This light should always be on in order to receive
television signals.
4.
Re
-
tune your television channels
. Each TV is different, but remember to run the Auto
-
tune each time you move to a
new location. Australia
’
s free
-
to
-
air television transmits on many frequencies. Note: Refer to your television manual
for instructions on how to run the auto
-
tune function.
5.
Stowing your antenna in the home position for travel.
Reverse step 2 by aligning the home arrow with the roof plate
arrow. This will place your antenna in the safe position so that it may be lowered without obstruction. Now turn the
crank handle anti
-
clockwise to
“
lower
”
the antenna to its travel position. Finally turn off the power supply
Green HOME arrow should line up with the plastic ar-
row marking on the roof plate for stowage
On/Off button