background image

12

WARNING CONT.:

k)    PERSONAL PRECAUTIONS 

     

1) Consider having someone close enough by to come to your aid    

     

when you work near a lead-acid battery.

 

   

2)  Have plenty of fresh water and soap nearby in case battery  

 

     

acid contacts skin, clothing, or eyes.

     

3)  Wear complete eye protection and clothing protection. Avoid    

     

touching eyes while working with battery.

     

4) If battery acid contacts skin or clothing, wash immediately with    

     

soap and water. If acid enters eye, immediately flood eye with  

 

     

running cold water for at least 10 minutes and get medical  

 

     

attention immediately.

    

5) NEVER smoke or allow a spark or flame within the vicinity of battery or engine.

     

6) Be extra cautious to reduce risk of dropping a metal tool onto    

     

battery. It might spark or short-circuit battery or other electrical    

     

part that may cause explosion.

     

7) Remove personal metal items such as rings, bracelets, necklaces,  

     

and watches when working with a lead-acid battery. A lead-acid 

     

battery can produce a short-circuit current high enough to weld a    

     

ring or the like to metal, causing a severe burn.

l)    When charging the internal battery, work in a well ventilated area and do  

    not restrict ventilation in any way.

m)  Under abusive conditions, liquid may be ejected from the battery; avoid  

    contact. If contact accidentally occurs, flush with water. If liquid contacts 

    eyes, additionally seek medical help. Liquid ejected from the battery may 

    cause irritation or burns.

n)   Do not expose a jump starter to fire or excessive temperature. Exposure 

    to fire or temperature above 130°C (266°F) may cause explosion. 

o)   Have servicing performed by a qualified repair person using only 

    identical replacement parts. This will ensure that the safety of the product 

    is maintained.

p)   Attach output cables to a battery and chassis as 

     indicated below. Never allow the output clamps

    to touch one another. 

q)    Dropping, hitting, or other excessive amounts of

    force to the Jump Starter may damage the unit

    (external and internal), which may result in loss of

    operation, electrical fire, or cause other serious

     damage.

          SAVE THESE INSTRUCTIONS

Summary of Contents for AC56388

















Reviews: