page 9
CONNECTING VIDEO AND AUDIO SOURCES
To connect your video sources, do the following:
• Connect your video source (camera, DVD player, VCR, etc) to any of the four BNC
video inputs (Video Source 1 through 4).
To connect your audio sources (Videum 004 AV only), do the following:
• Connect your audio sources via the Audio Adapter Cable (Mini DIN to 4 x Phone
jack 3.5mm) to the 8pin Mini DIN Jack.
INSTALLING THE VIDEUM SOFTWARE
The Videum Software CD contains the Drivers required for using the Videum board, ap-
plications, and documentation.
Note: If the “Found New Hardware Wizard” popup appears after you start up your sys-
tem, be sure to cancel out of it. It may take up to four cancellations (depending on the
capture card that you installed) to dismiss the popup.
1. Start your computer and insert the Videum Software CD.
2. From the Videum Software CD menu, select your preferred language and click to run
Setup. Alternatively, run the “Setup.exe” application directly from the root directory
of the CD.
The installer guides you through the software installation process. It is recommended
that you use the defaults.
