SECTION 7 –
PLUMBING
7-12
NOTE: If Waste Pump stalls, check breaker in
the load center. If problem persists,
remove black plug and motor shaft
access plate; then manually turn pump
shaft (located on the end of the Waste
Pump) with a screwdriver.
Further Information
For further Waste Pump operating and
troubleshooting information, see the
manufacturer’s user guide provided in your
InfoCase.
Dumping Holding Tanks
1. Remove sewage drain hose from storage
compartment (located on left sidewall).
2. Remove dust cap from sewage drain outlet
and connect sewage drain hose. Be sure it is
firmly attached.
3. Place the outlet end of sewage drain hose into
disposal opening.
NOTE: Black and Gray Waste Tank Drain valve
positions may be reversed, depending on
floorplan and tank location.
4. Open the Black Waste Tank Drain valve with
a quick pull and make sure there are no sags in
the hose. Close Black Waste Tank Drain valve
as soon as tank is empty.
Waste Pump Enclosure
(Located on passenger side beneath coach)
•
Remove black plug to access waste pump
Waste Pump
(Located on passenger side beneath coach)
•
With black plug removed you will be able
to remove the motor shaft access plate.
-Typical View
• Motor Shaft
Access Plate
Sewage Drain Hose
(Located beneath passenger rear coach)
Sewage Drain Outlet
(Located beneath driver side coach)
