![Winnebago Minnie Winnie Premier Owner'S Manual Download Page 73](http://html.mh-extra.com/html/winnebago/minnie-winnie-premier/minnie-winnie-premier_owners-manual_987502073.webp)
8-3
SECTION 8 –
ENTERTAINMENT
3. Rotate the Attenuator Dial fully
CLOCKWISE.
4. Press Release Button on the Rotational Knob
and rotate antenna (until maximum number of
LED lights illuminate on the Signal Meter).
NOTE: LED lights will illuminate from left to
right. All LED lights may not illuminate,
depending on signal strength.
5. Rotate Attenuator Dial COUNTER-
CLOCKWISE until the last illuminated LED
light flickers.
6. Rotate antenna to illuminate the last flickering
LED light.
7. Repeat Steps 5 and 6 to pinpoint signal
reception.
NOTE: Refer to television manufacturer’s
instructions to scan for available
channels.
Further Information
See the antenna manufacturer’s user guide
provided in your InfoCase for complete operating
and maintenance information.
TV SIGNAL AMPLIFIER
The TV Signal Amplifier is built into the
antenna and can be turned on or off with a power
switch located on a switchplate near the
entertainment center cabinet.
An indicator light will illuminate when the
switch is on and the signal amplifier is active.
EXTERIOR CABLE TV
CONNECTION
The exterior cable TV connection receptacle
on your coach provides connection for use of a
TV for your outdoor entertainment.
.
TV Signal Amplifier Power Switch
(Located in an overhead cabinet or mounted
on a wall near the TV)
-Typical View
• Power
Switch
Exterior Cable TV Connection
(Located near entrance door)
-Typical View