SECTION 8 –
ENTERTAINMENT
8-2
Connecting Satellite Dish Receiver
•
Connect Satellite Receiver to the Accessory
Connection Cable (Satellite Receiver 1 or 2.)
These cables are located in a front overhead
cabinet.
To Watch a Blu-ray
1. Insert Blu-ray into the player. Blu-ray will
begin to load automatically.
2. The Blu-ray may load directly to the
main title/menu screen or it may
begin to play previews. You may be able to
skip previews if desired by pressing the
chapter “skip” button on the Blu-ray player
remote until you see the main menu screen.
3. When the main menu screen appears, use the
arrow buttons on the Blu-ray player remote to
select the desired entry or press the “Enter”
button on the Blu-ray player remote to begin
playing the feature.
Further Information
Refer to the manufacturer’s user guide
provided in your InfoCase for complete operating
instructions.
HDMI VIDEO SELECTION
SYSTEM
The HDMI Video Selection System allows
you to watch high definition video from multiple
sources on multiple TV’s at the same time.
TVs connected to this system are:
• Output A - Lounge TV
• Output B - Bedroom TV
• Output C - Exterior Entertainment Center TV
• Output D - 2md Lounge TV/Bathroom (if
equipped)
You can select either:
• 1 = Blu-ray
• 2 = Satellite Receiver 1
• 3 = Satellite Receiver 2
• 4 = Auxiliary (Dash Radio House Mode).
All TV’s and A/V sources operate from 120-
volt AC household current only, so you must
have either the shoreline connected, the generator
running, or the inverter turned on (if equipped).
NOTE: Green lights that are illuminated on the
HDMI Video Selection System indicate
that video sources are active.
NOTE: There will be a slight delay when
changing sources. Winnebago
Industries
®
recommends setting each
component to a maximum video output
resolution of 1080i for proper operation.
Select Video Source and TV
•
Power “ON” TV, HDMI Video Selection
System, TV, Sound Bar (if desired), and Video
source (DVD player, Satellite receiver(s), or
Dash radio).
• Infrared Emitter
Accessory Connection
Cables
* Satellite Receiver 1
and Satellite Receiver 2
HDMI Video Selection System
(Located in front passenger overhead cabinet)
HDMI Video Selector
Control
(Located in your InfoCase
Box)
• Used to control main
HDMI Video
Selection System only.
HDMI Video
Selection
System