51
See instruction in Section ????10 to prepare the toilet for storage in freezing conditions.
POWER ROOF VENT – BATH AREA
Some models are optionally equipped with a powered roof vent in the bath area. A push button switch for
the vent fan is located up on the vent. The vent dome can be raised and lowered using the crank handle.
SLIDER WINDOWS
Lift the latch handle straight out from the window. Grasp the sliding window edge frame and slide the
window to the side. Be sure the latch is raised before trying to slide the window closed.
FRAMELESS TORQ WINDOWS
Torq style windows have a knob at the bottom of the window that your turn to open and close the windows.
When closing be sure to snug the knob tightly to ensure your window stays closed.
NIGHT PLEATED WINDOW SHADES
Tension Adjustment:
The tension of the pleated shades can be adjusted if they become loose and will not stay up when raised, or
they are too tight and are difficult to raise and lower.
To tighten the tension, simply wrap the lower end of the guide cords (on each side of the shade) a few turns
around the spools at the lower corners of the shades.
To loosen the tension, unwrap the guide cords from the spools one turn at a time until desired tension is
achieved.
Preserving Shape:
The pleated shades are made using high quality materials that are designed and woven to retain their shape
throughout their useful life. They may lose their crisp shape, however, if left in a lowered position for an
extended period of time without being raised periodically. If this happens, the pleats can be restored using
this simple method.
With the shade fully lowered, dampen the entire area of the shade with a good quality laundry sizing
spray.
Raise the shade fully while still damp and let it remain in the raised position for about 24 hours, until the
sizing has dried and “set”.
Reapply sizing periodically (every few months) as needed.
We recommend that you fully raise pleated shades when they are not needed, especially in warm
environments, to prevent them from losing their shape.