SECTION 3 –
DRIVING YOUR MOTORHOME
3-2
•
Swivel
- Lift up on the lever to operate.
•
Forward and Rearward Adjusting Bar
-
Pull the bar upward to move the seat forward
or rearward. Release at the desired position.
Armrest Adjustment
The armrests may be swung upward out of the
way for easy exit or access to the front seats. A
roller on the underside of the front of the armrest
also lets you adjust the resting angle for personal
comfort, whether the seat is upright or reclined.
Further Information
See the chassis manual in your InfoCase for
instructions on seat adjustments.
SEAT BELTS
Seats intended for occupancy while the
vehicle is in motion are equipped with seat belts
for the protection of the driver and passengers.
Lap Belts
The lap belts must be worn as low as possible
and fit snugly across the hip area. Always sit
erect and well back into the seat. To gain full
protection of the safety belt, never let more than
one person use the same safety belt at any one
time, and do not let the safety belts become
damaged by pinching them in the doors or in the
seat mechanism. After any serious accident, any
seat belts which were in use at the time must be
inspected and replaced if necessary.
Adjustment:
To lengthen belt, swivel the tab end at a right
angle to belt and pull strap to desired length. To
shorten, pull loose end of belt.
To Fasten:
Be sure belt is not twisted. Grasp each part of
the belt assembly and push tongue into buckle.
Adjust to a snug fit by pulling the loose end away
from the tongue.
To Release:
Press button in center of buckle and slide
tongue out of buckle.
Swivel
Driver Seat
-Typical View
Forward and Rearward
Adjusting Bar
-Typical View
Armrest
Height
Adjuster
1- Insert tab into buckle
slot until it “clicks” and is
locked
2- Pull strap to tighten
3- Press to
release