6-3
SECTION 6 -
ELECTRICAL
9. Then rotate to the smaller opening to enclose
the cord.
The power cord is designed to ground the
electrical system through the receptacle. It is also
designed to carry the amperage output of most
campground outlets. If the electrical receptacle to
be used is designed to mate with the three prongs
on the power cord plug, the electrical connection
can be expected to carry rated load.
Park Fuses or Breakers
Most campgrounds are equipped with a fuse
or circuit breaker at the receptacle (which we
recommend shutting off before engaging or
disengaging the power cord.) This protects the
park’s wiring, as well as the power cord on your
vehicle from electrical damage. If electrical
power fails, contact the park attendants and have
them check the fuse or breaker for your supply
receptacle.
INVERTER UNIT – 1000W
–If Equipped
The inverter changes 12-volt DC battery
power into 120-volt AC power for use by 120-
volt AC equipment inside the coach. The inverter
unit is located inside an exterior compartment.
NOTE: The inverter is not intended for steady
use while “dry camping”. Batteries will
deplete quickly with use of the inverter.
The inverter is intended for limited, short
term power usage when not connected to
shoreline or generator power.
The inverter can also be used while
driving the motorhome because the
engine alternator will charge the
batteries while driving.
NOTE: Do not leave the shoreline plugged in
during storage. Follow regular battery
inspection and maintenance.
WARNING
Service inlet access must be closed when
utility connections are not in use.
NOTICE
Do not store items too closely around the
inverter unit in the storage compartment.
The inverter generates heat while
operating and needs unrestricted airflow
for proper cooling. Damage to the inverter
can result.
Inverter Unit
(Located inside an exterior compartment)
-Typical View
