26
9.3. Battery
The (optional) back-up battery enables you to perform 9 complete cycles when the bed is not connected to the
mains.
After these 9 cycles, a beep warns you that you need to to re-connect the bed to the mains to recharge the
battery. However, you still have one more complete cycle of autonomy without reconnecting.
Operating instruction:
A new battery needs to be charged for 24 hours before using it for the first time.
The purpose is to have batteries in their maximum state of charge and hence increase their service life.
Storage conditions:
These must be recharged if the date of production indicated on the label is greater than or equal to 12 months.
Storage temperature
-10°C à +40°C
Battery change:
You must change the battery if it can no longer be used for 5 complete cycles when the bed is not connected
to the mains.
Disconnect the battery cable from the power supply.
Reassemble the new battery in the reverse order of removal.
Reference: 61300120.
Product designation: batterie lithium BA21
Battery
Power supply
