5
ENGLISH
AIRFLO DUO
3
Operation
- fig.
3
Disconnect the Airflo
Duo from the battery
charger.
•
Connect the hose (
A
) to the valve on the
inflatable product. When using to inflate the
Mangar Rhino, ensure you always inflate the
sections in order from 1 through to 4. Please
refer to the separate Rhino User Instructions
for full detail.
•
Connect the hose from the inflatable to
the Airflo
Duo air outlet socket (
B
). The
connector will ‘click’ into place when firmly
pushed onto the socket. Note: Either end of
the hose is compatible with the inflatables
and the Airflo Duo.
•
To switch on, press the ‘Power’ button (
C
).
The compressor will then begin to inflate
the product.
•
If using to inflate the Rhino, when full
inflaion is reached on each tier, all 4 lights
will flash.
•
Detach the hose from the inflatable before
pressing the power button to switch the
Airflo Duo off. The indicator lights will go
out.
B
Mains Power Adaptor
- fig.
2
A mains power adaptor is available to power
the Airflo Duo directly from a mains power
socket. The adaptor is specific to the Airflo
Duo and is the only approved unit to be
used for this purpose. Connect the adaptor
between a mains power socket and the
adaptor inlet socket on the end of the Airflo
Duo (A).
NOTE
: This adaptor, has a non-standard
output connector and powers the Airflo Duo
directly, it will not charge the battery. The only
way to charge the battery is to use the charger
which was supplied with the Airflo Duo. With
the power adaptor connected, the Airflo Duo
behaves in the same way as if it was running
on the battery, the only functional difference
is that the battery indicator will show bottom
LED orange whilst the Airflo is running.
2
A
A
C