AIRFLO 12
9
ENGLISH
Airflo 12
Weight:
3.7Kg (8 lbs)
Output pressure:
0.25 bar (3.75 psi)
Batteries:
1 x 12v - 2200mAh Ni-MH battery pack (CD0315)
Battery Life:
Greater than 500 charging cycles (1 year depending on usage)
Environmental protection:
(Airflo 12 housing)
IP41 (Protection from entry by solid objects with a diameter or
thickness greater than 1.0mm & dripping water)
(Push-button hand control)
IP67 (Protected against immersion upto 30 minutes)
Type BF equipment
This equipment has been tested and meets the requirements of current EMC legislation
Charger:
Model number
- HX1506SR
Input:
AC 100v - 240v, 50-60Hz, 0.5A Max
Output:
DC 15v, 0.35A
Class II Double insulated equipment.
Specifications
Trouble shooting guide
Problem
Remedy
•
Compressor does not run when ‘up’ is
selected.
•
Ensure that the air hose from the product
being inflated is connected to the Airflo.
•
Check that there are no kinks in the air hose.
•
Compressor keeps stopping when trying to
inflate the lifting aid.
•
Check that there are no kinks in the air hose.
•
Bottom Battery Status Indicator light solid
‘Red’ and product will not deflate.
•
Low battery capacity, recharge for a
minimum of 2 hours.
•
Bottom Battery Status Indicator flashing red
every 2 seconds.
•
Internal pump temperature too high - allow a
cool down period of 60-90 minutes.
•
Bottom Battery status indicator flashing Red
every ½ second.
•
Current overload. Check there are no kinks in
in the air hose.
•
Compressor causes electrical interference
with another piece of electrical equipment.
•
Move either the compressor or other item
further away from each other until the
interference stops.
Summary of Contents for Mangar AIRFLO 12
Page 43: ...AIRFLO 12 43...
