Winncare Axtair Automorpho Plus, Technical Manual

Page: 5 / 38

WINNCARE
- 5 -
MAINTENANCE/DISINFECTION
It is essential to disconnect the power cord connected to the compressor from the mains
power outlet. The “mains” indicator must be off.
- Do not use a high pressure jet to clean an AXTAIR line compressor
- Do not spray liquid to avoid any damage to the compressor by penetration of liquid
inside the box.
Do not use abrasive cleaning products such as industrial detergents, acetone type
solvents, ether and colouring products (iodized alcohol, potassium permanganate,
silver nitrate etc.). Do not allow abrasive materials such as steel wool or “ scotch brite ”
pads.
COMPRESSORS:
Use a cloth soaked in a detergent product solution or CE* labelled surface
detergent/disinfectant at the use concentrations recommended by the manufacturer.
Adhere to the remanence times.
MATTRESS:
The pneumatic unit, cells and harness, and the AXENSOR® box for mattresses in the
AXENSOR® range can easily be dismantled from the base.
For AXENSOR® mattresses, the AXENSOR® pneumatic unit and control box must be
manually disinfected: use a cloth soaked in a detergent solution or CE* labelled surface
detergent/disinfectant at the use concentrations recommended by the manufacturer.
Adhere to the remanence times.
The covers and the bases can be machine washed in the following conditions:
Wash in water, maximum temperature 90°C, reduced mechanical
action, rinsing at decreasing temperature, reduced spinning.
Bleaching possible, chlorination at 5000 ppm allowed.
Ironing excluded.
Dry cleaning not allowed, use of solvent-based stain remover not
allowed.
Drum drying authorized, moderate temperatures