10
5" S-Series HMI Quick Start Guide
Turning On or Off Your Device
Turning On
Follow the following steps to turn on your device:
1.
Connect the power cable to AC to DC adapter.
2.
Connect the open wire of AC to DC adapter to the terminal block female connector and
tighten the screws to secure it to the HMI device.
3.
Connect the terminal block female connector to the device's male connector.
4.
Plug the power cord to the AC outlet and the device will turn on automatically.
CAUTION
Use only the AC adapter included in your package
(Rating: Output 4.2 A). Using other AC adapters may damage the device.
Turning OFF
Remove the power input to shut down the device.
Press the reset button to reboot the HMI device.
ALTERNATING CURRENT
This product must be grounded. Use only a grounded AC outlet. Install the additional
PE ground wire if the local installation regulations require it.
Reset Button
