TA33
Motherboard User Manual /
Engineering Spec.
2.8 Jumper Setting
A pair of needle-nose pliers may be helpful when working with jumpers. If you have
any doubts about the best hardware configuration for your application, contact your
local distributor or sales representative before you make any changes. Generally, you
simply need a standard cable to make most connections.
The jumper setting diagram is as below. If a jumper shorts pin 1 and pin 2, the setting
diagram is shown as the right one.
The following tables list the function of each of the board's jumpers.
Label
Function
Note
JP1
RS232 / RS422 / RS485 Selector
2x3 header , pitch 2.0mm
JP2
RS232 / RS422 / RS485 Selector
3x4 header , pitch 2.0mm
JP3
LVDS PWR Selector
2x3 header , pitch 2.0mm
JP4
Back Light PWR
1x3 header , pitch 2.0mm
JP5
VR/Software
1x3 header , pitch 2.0mm
JP6
PWM/DA
1x3 header , pitch 2.0mm
JP7
PWM Level
1x3 header , pitch 2.0mm
JP8
RS232 / RS422 / RS485 Selector
3x4 header , pitch 2.0mm
JP9
RS232 / RS422 / RS485 Selector
2x3 header , pitch 2.0mm
SW1
NAND Flash / SD Boot
1
2
3
TA33 Motherboard User Manual
9
