Winmate R19IB3S-MR**FP, User Manual

Page: 18 / 39

Users Manual Marine Bridge Panel PC System 17
2.3 Installing Note
The following common safety precautions should be observed before installing any
electronic device:
•
Strive to use separate, non-intersecting paths to route power and networking
wires. If power wiring and device wiring paths must cross make sure the wires
are perpendicular at the intersection point.
•
Keep the wires separated according to interface. The rule of thumb is that wiring
that shares similar electrical characteristics may be bundled together.
•
Do not bundle input wiring with output wiring. Keep them separate.
When necessary, it is strongly advised that you label wiring to all devices in the
system.
！！
ATTENTION
！！