15
Chapter 2: Installation
2.5 Connecting Peripherals
The panel control port is designed for monitors that work with a variety of compatible video
sources. Due to the possible deviations between these signal sources, you may have to make
adjustments to the monitor settings from the OSD menu when switching between these sources.
Note:
Notice that standard input terminals include VGA and HDMI. Your device
may be equipped with DVI-D, S-Video or Composite input terminals based
on your order.
2.5.1 VGA Connector
Chassis Display uses standard 15pin D-sub connector. Plug 15-pin VGA signal cable to the VGA
connector in the rear of motherboard, and plug the other end to the monitor. Secure cable
connectors with hexagonal copper pillars M3x4mm.
Pin assignment and signal names of VGA connector
2.5.2 HDMI Connector
Plug HDMI signal cable to the HDMI connector on the rear side of PC system, and plug the other
end to the monitor.
Pin assignment and signal names of HDMI connector
Pin №
Signal Name
Pin №
Signal
Name
1
RED
2
GREEN
3
BLUE
4
NC
5
GND
6
AGND
7
AGND
8
AGND
9
VGA_5V
10
GND
11
NC
12
DDCSDA
13
H Sync
14
V Sync
15
DDCSCL
Pin №
Signal Name
Pin №
Signal Name
1
H
2
GND
3
HDMI_RX2-
4
H
5
GND
6
HDMI_RX1-
7
H
8
GND
9
HDMI_RX0-
10
H
11
GND
12
HDMI_RXC-
13
HDMI_CON_CEC
14
NC
15
HDMI_CON_SCL
16
HDMI_CON_SDA
17
GND
18
+5V_HDMI
19
HDMI_CON_HP
