![Winmate R10L OF TR Series User Manual Download Page 6](http://html1.mh-extra.com/html/winmate/r10l-of-tr-series/r10l-of-tr-series_user-manual_987019006.webp)
6
8.4"~32" Transflective Open Frame Display User Manual
Safety Precautions
For your safety carefully read all the safety instructions before using the device. Keep
this user manual for future reference.
•
Always disconnect this equipment from any AC outlet before cleaning. Do not use
liquid or spray detergents for cleaning. Use a damp cloth.
•
For pluggable equipment, the power outlet must be installed near the equipment
and must be easily accessible.
•
Keep this equipment away from humidity.
•
Put this equipment on a reliable surface during installation. Dropping it or letting it
fall could cause damage.
•
The openings on the enclosure are for air convection and to protect the equipment
from overheating.
Caution
Do not cover the openings!
Attention
Ne couvrez pas les ouvertures!
•
Before connecting the equipment to the power outlet make sure the voltage of the
power source is correct.
•
Position the power cord so that people cannot step on it. Do not place anything over
the power cord.
•
If the equipment is not used for a long time, disconnect it from the power source to
avoid damage by transient over-voltage.
•
Never pour any liquid into an opening. This could cause fire or electrical shock.
•
Never open the equipment. For safety reasons, only qualified service personnel
should open the equipment.
•
All cautions and warnings on the equipment should be noted.
Caution
Always ground yourself to remove any static charge before
touching the board. Modern electronic devices are very sensitive to
static electric charges. As a safety precaution, use a grounding wrist
strap at all times. Place all electronic components in a static-dissipative
surface or static-shielded bag when they are not in the chassis.
Attention
Mettez-vous toujours à la terre pour éliminer toute charge
statique avant de toucher la carte. Les appareils électroniques
modernes sont très sensibles aux charges électrostatiques. Par
mesure de sécurité, utilisez à tout moment un bracelet antistatique.
Placez tous les composants électroniques dans une surface
antistatique ou dans un sac antistatique lorsqu'ils ne sont pas dans le
châssis.