Winmate R10ID3S-MRXX, User Manual

Page: 19 / 23

Users Manual Marine Bridge Display System 18
Chapter 3 Operation of the Panel PC
3.1 Input / Output Signals Overview
The Marine Panel PCs design with versatile computing functions fulfilling the embedded
applications. The default function include three COM ports (two for RS232 and one for
RS232/422/485), one for VGA output, two for USB 2.0, Two RJ45.
Figure 3.1 Input / Output Signals
Power input (DC Version / AC Version)
Default DC terminal block power source input compact design meets the maritime application.
The terminal block is to be secured that the cable to screw terminal.
AC Std 90V to 265V power input is also available for AC version option, use standard power
cord to connect to the AC power inlet.
RS232 serial port for connection (COM1, COM2,COM3, COM4, COM5)
The Marine Panel PCs support five COM ports (including one for RS232/422/485 optional) to
satisfy the maritime accessories sensor units. Connect Standard D-SUB 9pin connector from
accessory system to connect to the Marine Panel PC to be a control center.
VGA port connection
Use D-SUB 15-pin (Female) VGA signal cable to connect to the other display for extension.
Fasten cable connectors with screws.
LAN port connection
The Panel PC supports one 10/100/1000 Mbps Ethernet interface for connecting to the
internet.
USB port connection
Use standard USB type A cable to connect any device that use USB interface for expansion
functions.