M133WU Quick Start Guide
15
Changing Touch Mode
The
tablet’s advanced capacitive touchscreen has three built-in operating modes, for users
to choose under different usage scenarios, when any mode is chosen, the background of
the icon will become green.
Mode
Usage Scenario
Hand/Rain
Mode
The Hand/Rain mode is the default operating mode of the
touchscreen. Under this mode, the touchscreen is set to have the
ability to reject false touch inputs while liquid is present on the
touchscreen. Once the liquid is removed from the touchscreen,
touch inputs from bare fingertips will continue to operate.
Support the following input solutions:
Active stylus w/ palm rejection
Rubber Tip passive stylus
Finger
Stylus Mode
Under the Stylus mode, the touchscreen is set to have the ability to
pick up touch inputs from the fine-tip passive capacitive stylus that is
shipped with the tablet. Touch inputs from bare fingertips will also
continue to operate.
Support the following input solutions:
Fine-tip passive stylus w/ palm rejection
Active stylus w/ palm rejection
Rubber Tip passive stylus
Finger
Glove Mode
Under the Glove mode, the touchscreen is set to have the ability to
pick up touch inputs while the user is operating the touchscreen with
gloves on. Touch inputs from bare fingertips will also continue to
operate.
Support the following input solutions:
Glove
Rubber Tip passive stylus
Finger
Changing Touchscreen Mode in Win-Set
To switch between the different touchscreen modes via the Win-set utility, perform the
following procedure:
1. Open Win-set utility by pressing
(Menu) Button located on the front panel, or by
launching Win-set utility application.
2. Click on
Touch mode
3. Select the desired touch modes by tapping on the button.
4. Now the touchscreen mode would behave as configured.
