21
Chapter 3: Initial Setup
Follow these steps before installing the IBDRW100-EX inside the enclosure box:
1.
Please check if the unit has been correctly installed without any damage
2.
Please check if the wiring and screws have been properly tightened
3.
Please check if the cable gland has been tightened
Follow these steps when maintaining the enclosure box:
1.
Prevent and avoid any formation of dusts, please clean it with a cloth
2.
Please check if there is any damage on the surface of the box
3.
Please check the tightness of the connections / wires
Follow these steps to install the IBDRW100-EX inside of the enclosure box:
1.
Attached DIN Rail adapter to the IBDRW100-EX Box PC using the screws provided
2.
Mount the DIN rail inside of the enclosure Box
3.
Press the stiff metal handle from (DIN Rail adapter) downward and insert the hook into
the DIN-rail
4.
Mount the Enclosure Box to a Wall / Skid, all the surface need to be flat to avoid any
distortion of the enclosure
5.
Use the proper dimensions for drilling the holes to mount the enclosure box to a wall.
