Winmate IA71, User Manual

Page: 17 / 100

IA71 Motherboard User Manual V1.0
7
the computer is less than the output current rating of each of the power supplies
output circuits.
2.2. Installing and Removing Memory Modules
IA71 motherboard supports one 200-pin SODIMM slot. The socket supports
up to 2GB DDR2 400/533 SDRAM. Press downwards on SODIMM until the
retaining clips at both ends fully snap back in place and the SODIMM is properly
seated. To install the DDR2 modules, locate the memory socket on the board and
perform the
Caution
!
The SODIMM only fits in one correct orientation. It will cause
permanent damage to the development board and the SODIMM if
the SODIMM is forced into the slot at the incorrect orientation.
2.3. I/O Equipment Installation
2.3.1. 12V DC-IN
The Motherboard allows to plug in 12V DC-IN jack on the board without another
power module converter under powered consumption by Intel Atom N270
1.6GHz processor.
2.3.2. PS/2 Keyboard and PS/2 Mouse
The Motherboard provides two PS/2 interface. The PS/2 connector supports
Keyboard and Mouse. In other cases, especially in embedded solutions, a mouse is
not used. Therefore, the BIOS standard setup menu allows you to select* “All, But
Keyboard” under the “Halt On” item. This allows non-keyboard operation in
embedded system solutions without the system halting under POST.