Winmate IA70, User Manual

Page: 17 / 111

IA70 Motherboard User Manual V1.1
7
2.2. Memory Module
（ （ （ （
DIMM
） ） ） ）
Installation
IA70 Motherboard supports one DDR2 memory socket for a maximum total memory
of 2GB in DDR2 memory type.
To make sure you have the correct DIMM, place it on the illustration as follow
showing the DDR2 DIMM. All the notches should match the DDR2 DIMM.
2.2.1 Installing and Removing Memory Modules
To install the DDR2 modules, locate the memory socket on the board and perform
the following steps:
1. Make sure the clips at either end of the DIMM socket are pushed outward to the
open position.
2. Hold the DDR2 module so that the notches of the DDR2 module align with those
on the memory socket.
3. Insert the bottom edge of the DIMM into the socket.
4. When the DIMM is inserted, push down on the top edge of the DIMM until the
retaining clips snap into place. Make sure the clips are firmly in place.