Winmate I771, User Manual

Page: 80 / 93

I771 Motherboard User Manual
71
TS on DIMM
TS on DIMM TS on DIMM
TS on DIMM
Enable/Disable Thermal Sensor on DIMM.
The choice: Enabled, Disabled
Memory Hole Memory Hole Memory Hole Memory Hole
In order to improve performance, certain space in memory is reserved for
ISA cards.
This memory must be mapped into the memory space below 16MB.
The choice: Disabled, 15MB-16MB.
Boots Graphic Adapter Priority Boots Graphic Adapter Priority Boots Graphic Adapter Priority Boots Graphic Adapter Priority
Select which graphics controller to use as the primary boot device.
The choice: IGD, PCI/IGD, PCI/PEG, PEG/IGD, PEG/PCI.
Internal Graphics Mode Select Internal Graphics Mode Select Internal Graphics Mode Select Internal Graphics Mode Select
Select the amount of system memory used by the internal graphics
device.
The choice: Enabled, 32MB, Enabled, 64MB, Enabled, 128MB.
Max TOLUD
Max TOLUD Max TOLUD
Max TOLUD
Maximum Value of TOLUD
The choice: 3G Bytes, 2.5G Bytes, 2G Bytes
GFx Low Power Mode GFx Low Power Mode GFx Low Power Mode GFx Low Power Mode
This option is applicable for SFF only
The choice: Disabled, Enabled.
PEG Port
PEG Port PEG Port
PEG Port
This setting allows you to select whether to use the on-chip graphics
processor or the PCI Express card. When set to [Auto], the BIOS checks
to see if a PCI Express graphics card is installed. If it detects that a PCI
Express graphics card is present, the motherboard boots up using that
card. Otherwise, it defaults to the onboard graphics processor.
The choice: Auto, Disabled.